Wednesday, July 1, 2009

Network repair when switching NIC

So recently I have a VMware image go down and needed to move it to another machine. I had problems with the NIC when it was moved. Here I what I did.

In terminal under root I typed
dmesg | grep eth0
You will probably get an error that the eth0 was changed. Take the new name for the eth0 and edit the..
nano /etc/networking/interfaces
I changed the 0 to 1 and then rebooted the machine and everything seemed to work fine.

Other command that I did where
modprobe e1000
or
modprobe pcnet32

No comments:

Post a Comment

Raspberry Pi Zero W - Wireless Configuation

create the file under "boot" folder wpa_supplicant.conf country=GB ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev u...