Monday, July 19, 2010

View 4 Blank or Black Screen

I was working on a VDI solution for the Cincinnati VMUG and running into a problem when I ran full screen on anything with a large monitor (over 1280x1024). I would get a disconnect or blank/black screen. If I ran it in large window setting it worked perfectly. I figured it had to be a problem with the video card setting in the Virtual Machine. After looking around the settings I thought I would change the video card ram from 8MB to 64MB. I figured that the video card settings with only 8MB couldn't handle the higher resolution. After changing the setting I tried it again with success.

No comments:

Post a Comment

Raspberry Pi Zero W - Wireless Configuation

create the file under "boot" folder wpa_supplicant.conf country=GB ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev u...